

Baader Astrosolar ClearWhite Safety Solar Filter Sheet, OD 5.1, Giant Size 117x117 cm
AstroSolar® ClearWhite 5.1 Safety Film: a solar filter film for direct solar observation and high-quality front-end filters for large telescopes.
Extra-large size: 117 x 117 cm (approx. 40 x 20 inches); optical density OD 5.1; light reduction greater than 99.999% or approximately a factor of 1:125,000.
For direct solar observation with the naked eye using a suitable mount, as well as for building front-end filters for telescope objectives, binoculars, spotting scopes, and camera lenses.
Produces a crisp, white solar image with high sharpness and contrast, even at the highest magnifications.
Meets the applicable transmission requirements of the EN ISO 12312-2:2015 standard for filters intended for direct solar observation.
Successor to the proven AstroSolar® OD 5.0 safety film, available since 1999, which offers a crisp white solar image and higher optical density.
Baader AstroSolar® ClearWhite OD 5.1 Safety Film
The Baader AstroSolar® ClearWhite OD 5.1 safety film is a high-quality, double-metallized solar filter film designed for direct solar observation and for building front-end filters for telescopes, binoculars, spotting scopes, and camera lenses.
The film has an optical density (OD) of 5.1 and reduces the intensity of sunlight by approximately 99.9992%, which corresponds to a reduction factor of about 125,000. It meets the applicable transmittance requirements of the EN ISO 12312-2:2015 standard for filters intended for direct solar observation.
Compared to the previous AstroSolar® OD 5.0 safety film, the new ClearWhite version provides a uniformly transparent solar image with a slightly higher optical density. Sunspots, granulation, and the fine structures of the photosphere can be observed with sharpness and high contrast when used with the appropriate optical equipment. Sharp, white solar image with high optical quality
The AstroSolar® ClearWhite OD 5.1 safety film was developed to provide a crisp, white solar image. Undesirable bluish or orange color casts that can occur with simpler solar filters are largely avoided.
The film is manufactured from a special substrate free of streaks and bubbles and achieves optical quality comparable to that of high-quality flat-parallel glass filters, despite being only 0.012 mm thick. The material is not ordinary Mylar; rather, it was developed to offer exceptional optical quality and purity.
The double-sided coating ensures particularly uniform filter performance and reduces the effect of isolated microscopic irregularities in the metallization. A single layer of AstroSolar® ClearWhite OD 5.1 safety film is sufficient to produce a safe solar filter with excellent image sharpness.
For direct solar observation and front-mount objective filters
AstroSolar® ClearWhite OD 5.1 safety film can be used for direct solar observation with the naked eye if handled correctly. This requires that the film be intact and used in a suitable, light-tight, and securely fastened holder.
For telescopes, binoculars, spotting scopes, and camera lenses, the film should only be used as a front-mounted objective filter. The filter must be placed in front of the optical entrance aperture, completely cover the aperture, and be secured against slipping, loosening, or wind.
Visual and Photographic Use
AstroSolar® ClearWhite OD 5.1 safety film is equally suitable for photography and visual observation. With the focal ratios of typical telescopes and camera lenses, exposure times are short enough to capture sharp images of the Sun in a single exposure or to take “lucky” images. This is perfect for observing and photographing the Sun under normal conditions, as well as during the partial phases of solar eclipses.
There is also no need to worry about looking through a camera’s viewfinder, as this can be done safely when the filter is properly installed in front of the optical system.
Making Custom Solar Filters
High-quality solar filters for telescopes, binoculars, spotting scopes, and camera lenses can be made using AstroSolar® ClearWhite OD 5.1 safety film in just a few simple steps.
Each sheet includes detailed installation instructions and safety information. You can also download them from this website. Tension-free installation is essential: the film must not be stretched or pulled tight. It must be mounted without wrinkles but without mechanical tension to preserve its high optical quality. The film may be slightly wavy or somewhat loose on the backing without negatively affecting optical performance.
Inspect both the film and the substrate before each use. Do not use the film if it has tears, holes, creases, significant scratches, delamination, loose areas, or extensive scuff marks or abrasions. Damaged film must not be repaired and must be replaced immediately.
Safety Instructions for Solar Observation
Never look directly at the sun without a proper solar filter. Regular sunglasses, thermal blankets, CDs, photographic neutral-density filters, or other untested materials are not suitable for visual solar observation, as they may transmit dangerous invisible radiation that, although not directly visible, can cause permanent eye damage.
A safe solar filter is also required during a partial or annular solar eclipse. Only during the brief phase of totality in a total solar eclipse—when the Sun’s photosphere is completely covered by the Moon—can the solar corona be observed without a filter. As soon as any part of the solar disk becomes visible again, a suitable solar filter must be used at all times.
Children may only use solar filters under adult supervision. Never leave solar filters, eclipse glasses, handheld viewers, solar telescopes, binoculars, or cameras unattended.
Specifications
AstroSolar® ClearWhite safety film, optical density 5.1, jumbo size 117 x 117 cm
Product Details
SKU 2422004
EAN Code 4047825062086
Manufacturer: Baader Planetarium
Net Weight (kg) 0.04
Optical Specifications
AstroSolar Film AstroSolar® ClearWhite Safety Film
Optical Density 5.1
Solar Wavelength: White Light
Mechanical Specifications
Inner diameter / Clear opening (mm) 117 x 117 cm
Does the solar filter have a mount or thread? No