
LUNT 32mm O-Ring for Pressure-Tuner of the MT & THa Solar Telescopes
LUNT0558330
Stock at Supplier
4.13
VAT excluded
Shipping 5/7d
- Spare part, cannot be used individually
- Only for Lunt Solar Systems MT and THa telescopes
- there are different sizes of O-rings!
- please note the description of this spare part!
Delivery Options
| Carrier | Description | Estimated Delivery | ||
|---|---|---|---|---|
![]() |
UPS - Resto del mundo | UPS - Rest of the World |
Tuesday, 3 March - Tuesday, 10 March |
|
UPS - Resto del mundo
UPS - Rest of the World
Estimated delivery:
Tuesday, 3 March - Tuesday, 10 March
✖
Spare part for the Pressure-Tuner of the LUNT SOLAR SYSTEMS H-Alpha solar telescopes of the MT and THa series
Two rubber O-rings are installed in the Pressure-Tuner of the Lunt Solar Systems solar telescopes to seal the air pressure adjustment system. Over time, the rubber in these O-rings can age and become porous, making it impossible to maintain air pressure. An older O-ring can then be replaced with this spare part. Replacement is simple and can be done by the user. Installation instructions can be found here under the "Instructions" tab as a downloadable PDF.
Please note:
Depending on the production series, the diameters of the Pressure-Tuner pistons may vary. There are O-ring pistons with an inner diameter of 32mm and an outer diameter of 40mm, and O-ring pistons with an inner diameter of 34mm and an outer diameter of 42mm. Please check the diameter of your old O-rings, this replacement part is an O-ring with an inner diameter of 32mm and an outer diameter of 40mm.
If you need the larger O-ring with an inner diameter of 34mm and an outer diameter of 42mm, this is the replacement part with item number 0558340.
LS50THa scopes have Pressure-Tuner with smaller diameters, for these you need replacement O-rings with item number 0558320.
After replacing an O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with the grease available under item number 0558350.
FEATURES
INCLUDES
- Inner diameter: 32mm
- Outside diameter: 40mm
- Can not be used individually, only as a replacement for the Pressure-Tuner of the Lunt Solar Systems MT and THa telescopes
- It does not matter which locking filter the MT or THa telescope has
INCLUDES
- Spare O-ring with 32mm inner diameter and 40mm outer diameter for the Pressure-Tuner of the Lunt Solar Systems H-Alpha MT and THa solar telescopes
| Color: | black |
|---|---|
| Extended warranty (years): | 2 |
| Material: | Rubber |
| Batteries required: | No |
Customers who bought this product also bought:
8 other products in the same category:
